Luck | Patches

Our patches are presented on a card with a QR code that will lead you directly to our detailed instructions. So as to love them strongly and for a long time, you can follow our detailed advice.

LAYING INSTRUCTIONS :
– Choose a fabric that can withstand the heat of an iron: cotton, linen, etc.
– Avoid silk, wool, cashmere, synthetics and leather.
Do a test by placing your iron very hot on a non-visible part of your garment and see how the material reacts.
– Do not heat seal our phosphorescent or reflective patches.
– Heat your iron to maximum. An old iron will not perform as well. Do not use a steamer.
– Heat the fabric before placing the patch, cover it with a cotton cloth.
– Press your iron very hard on the covered patch until the glue melts (allow at least 15 seconds).
Be careful not to burn your garment!
– Wait a little until the garment is cooler, then check by gently lifting one edge of the patch with your fingernail to test the bond. If necessary, start again by pressing hard with a very hot iron.
– Turn your garment inside out and press the iron firmly against the back of the fabric again.
– Wait 72 hours for the glue to become fully active.

WASHING INSTRUCTIONS :
– Wash your garment inside out, maximum 30°.
– Do not tumble dry or spin dry
– Use a chemical-free detergen
– Do not use bleach or fabric softener
– Do not iron